WANTED: TRAILER ASSEMBLER

JOB DESCRIPTION

JOB SUMMARY:

• Performs multiple tasks using a variety of hand-held pneumatic tools and manufacturing equipment.
• Builds component assemblies.
• Installs and assembles semi-trailers on a production line.

ESSENTIAL FUNCTIONS:

Operates various hand held pneumatic and electric power tools and other machinery including drills, drivers (screws and other fasteners), riveters (pistol grip, pop riveters, mashers and squeezers), impact wrenches, nut-runners, saws and grinders.

• Works with various building materials including steel, aluminum, wood, fiberglass, composites, small fasteners and fittings, adhesives and oil-based products.
• Supplies area with these materials using an overhead crane, forklift, hand / powered carts or carrying materials by hand. 
• Keeps equipment and work area clean and orderly.
• Observes all safety and security procedures.
• Performs other routine duties as necessary.
• Use air-powered and electric hand tools including drill, circular saw, grinder, rivet gun, impact  wrench, throughout the shift to fabricate, fasten, and install components.
• Set-up materials for fabrication. Wood sheets, steel and aluminum parts
• Use of manual hand tools including hammers, wrenches, screwdrivers, hole alignment tools, etc.
• Operate equipment such as rivet squeezing machines, hoists, carts, presses, and movers

QUALIFICATIONS

Knowledge, Skills, and Abilities:

• Ability to accurately read a tape measure and other measuring tools.
• Ability to work with hands and to work in mechanically oriented situations following a supervisor's instruction
• Aptitude to learn and retain new information
• Ability to follow instructions, given either verbally or in writing
• Ability to identify and resolve problems in a timely manner.

Physical Qualifications

• Ability to stand and move about on concrete 8-12 hours a day
• Ability to perform heavy lifting (50 pounds) multiple times daily in an 8 to 12 hour shift
• Ability to maneuver large parts and assemblies (up to 180 pounds) by pushing, pulling and flipping them into place

ADDITIONAL INFORMATION

• Temp-to-hire position
• Full time, non-exempt
• Daylight shift is 6:00 am to 4:30 pm Monday thru Thursday. Overtime may be required on Fridays
• Overnight shift is 7:00 pm to 5:30 am Monday thru Thursday. Overtime may be required on Fridays
• Starting rate is $10.65 / hr. Overtime is paid at time and one half for any time worked over 40 hours per week.
• Call 570-743-2300 for more details or for information on how to apply.
• May apply in person at any of the following OneSource Staffing branch offices:

1. Selinsgrove:   1969 N Susquehanna Trail, Selinsgrove, PA 17870
2. Montoursville:  999 N. Loyalsock Avenue, Montoursville, PA 17754
3. Berwick:  7539 Columbia Boulevard, Berwick, PA 18603

WANTED: LEGAL SECRETARY

LEGAL SECRETARYWilliamsport, PA, USA

COMPANY DESCRIPTION
OneSource provides premium employment solutions for both employers and job seekers. We help regional companies find the perfect candidate, save on healthcare, improve payroll efficiency and more. For job seekers, we find the right situation and environment for continued success. OneSource has the resources to service a business of any size, but is small enough to give extensive attention to every client, partner, or candidate

JOB DESCRIPTION

• Prepare and process legal documents and papers, such as summonses, subpoenas, complaints, appeals, motions, and pretrial agreements.
• Mail, fax, or arrange for delivery of legal correspondence to clients, witnesses, and court officials.
• Receive and place telephone calls.
• Organize and maintain law libraries, documents, and case files.
• Schedule and make appointments.
• Make photocopies of correspondence, documents, and other printed matter.
• Assist attorneys in collecting information such as employment, medical, and other records.
• Draft and type office memos.
• Complete various forms, such as accident reports, trial and courtroom requests, and applications for clients.
• Prepare and distribute invoices to bill clients or pay account expenses.

QUALIFICATIONS

• 2-3 years experience working in a law office or court clerk setting
• High School Diploma/GED Required.  AS preferred
• Research experience a definite plus
• Microsoft Office Suite

• 
  

Click HERE to Apply or send resume via email. 

WANTED: Manufacturing Engineer

JOB DESCRIPTION

Summary:

A Williamsport contract job shop specializing in stainless and other formable metals and alloys fabrications for use in aerospace, medical, pharmaceutical, food processing, microelectronics and defense, is seeking a highly motivated individual to join its engineering department.

Job Responsibilities:

• Development/Analysis of customer specified products
• Processing customer quotations
• Design of method  of manufacturing and drawings for new specified products
• Provide customers with ongoing technical support
• Work closely with production and quality assurance in a hands-on acapacity
• Be involved in all engineering and technical-related activies of the company
• Manage several projects simultaneously with minimal supervision

QUALIFICATIONS

• Must possess excellent communication skills & ability to work in a team environment
• Degree in Engineering discipline with a minimum of three years experience in a manufacturing environment
• Applicants with less than 5 years experience must also submit college transcripts
• Experience working with geometric tolerancing, Excel, MS Outlook and Word
• Experience working with Solidworks, ASME Design and customer support is a plus!

Please forward resume and letter of interest to Ted Taylor  or mail to

999 North Loyalsock Avenue, Suite E Upper Level, Montoursville, PA 17754

WANTED: Set-up Technician

Summary:

Long-term Full time Setup Technician on first and second shifts in a contract job shop with over 50 years manufacturing experience as a contract manufacturer specializing in stainless and other formable metals and alloy fabrications for use in aerospace, medical, pharmaceutical, food processing and defense.

Responsibilities:

• Reviewing and maintaining setup sheet accuracy, organizing tools and preparing tools and machinery for set-up,
• Assisting with setup as needed, maintaining cataloged and orderly storage areas.

Qualifications:

• Should have excellent mechanical abilities, problem solving and computer skills, willingness to learn new skills, and attention to detail.
• Experience in setup of hydraulic presses, flowform machines or CNC machining centers a plus.
• High School Diploma/GED

Click here to apply or call OneSource Staffing Solutions at 570.368.5000

WANTED: CNC Machinist

Summary:  

CNC Machinist specializing in fabrications from stainless and other formable metals and alloys used in aerospace, medical, pharmaceutical, food processing and defense. This is a second shift long-term position working full-time on a 4-day work week.

 Responsibilities:

·         Working from blueprints, specifications and/or instructions to rough, machine and finish parts to close tolerances;

·         Setup and operate CNC (lathes and mills) vertical and /or horizontal machining centers to include review of the CNC program and blueprints,

·         Verifying speeds and feeds for materials and tooling and operating machines to produce quality parts in an efficient manner;

·         Create and edit simple programs at the machine, maintain equipment and work area in a clean and orderly condition and follow prescribed and standard safety regulations.

·         Individual must be able to finish machine parts and castings of various alloys and use precision measuring instruments such as micrometers, vernier calipers and dial indicators to achieve and maintain close tolerances.

Qualifications:

·         Must be able to attach fixtures and tools according to setup sheet

·         Read and interpret complicated drawings

·         Thorough knowledge of CNC equipment, controls and language.

·         CNC programming and multi-axis machine operating experience beneficial but not required.

·         HS Diploma/GED

Click Here to Apply or call OneSource Staffing Solutions at 570.368.5000.

Wanted: Slicer Operator

Job Title: Slicer Operator

SUMMARY: 

The Slicer Opreator is responsible for the operation of the slicing machine that cuts the logs into sheets of veneer.

ESSENTIAL DUTIES AND RESPOSIBILITIES

·         Loads ½ and ¼ logs onto the slicing machine using a hoist and by hand carrying

·         Straightening and adjusting veneer as it’s sliced and passed through to the dryer

·         Making necessary adjustments to the machinery, equipment and computer to allow efficient and high quality production

·         Operating a chain saw to cut out knots in log

·         Checking for defects while inspecting the veneer to prevent production errors

·         Other duties as assigned.

                

QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.  The requirements listed below are representative of the knowledge, skills and/or ability required.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

·         EDUCATION and/or EXPERIENCE: 

High school diploma or general education degree (GED) preferred; or one to three months industrial experience or equivalent combination of education and working experience.

• LANGUAGE SKILLS:

Ability to read and comprehend simple instructions, short correspondence and memos.  Ability to write simple correspondence.  Ability to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.

• MATHEMATICAL SKILLS:

Ability to add, subtract, multiply and divide numbers.

Wanted: Dryer Operator

Job Title: Dryer Operator

SUMMARY: 

The Dryer Operator is responsible for the operation of the dryer machine that dries the veneer and to ensure the veneer is stacked properly coming off the conveyor.

ESSENTIAL DUTIES AND RESPOSIBILITIES:

·         Receiving and guiding each sheet of veneer from the dryer, off the conveyor belts and into bundles of 23 or 32 sheets

·         Operation of the control box to position bars and pallets

·         Use of a moisture gauge to measure moisture in veneer intermittently for each half log

·         Entering data into the computer

·         Print tags with designated log number and measurements

·         Other duties may be assigned

                

QUALIFICATION REQUIREMENTS:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.  The requirements listed below are representative of the knowledge, skills and/or ability required.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

·         EDUCATION and/or EXPERIENCE: 

High school diploma or general education degree (GED) preferred; or one to three months industrial experience or equivalent combination of education and working experience.

•   LANGUAGE SKILLS:

Ability to read and comprehend simple instructions, short correspondence and memos.  Ability to write simple correspondence.  Ability to effectively present information in one-on-one and small group situations to customers, clients and other employees of the organization.

•   MATHEMATICAL SKILLS:

Ability to add, subtract, multiply and divide numbers.

•   REASONING ABILITY:

Ability to apply commonsense understanding to carry out detailed but uninvolved written or oral instructions.